Skip to main content

Sea to Summit UltraLight Sleeping Mat for Backpacking--Review

The sleeping mat inflated and on the ground
Intro and Specs:
     The Sea to Summit UltraLight Sleeping Mat is a inflatable sleeping mat made for backpacking. This mat is generally used in conjunction with a sleeping bag. A sleeping mat is used to insulate the person sleeping on it from the ground. This particular mat is made by the Australian company Sea to Summit. The company makes high quality products for hiking, backpacking, camping, and other outdoor activities. I got this sleeping mat because it's really compact and more compact than most of the other kinds of sleeping mats. The packed size of this sleeping pad is 3 by 8 inches or 7.5 by 20 centimeters. The sleeping pad has an R value (Amount of insulation) of only 0.7 This is fine during the summer but it may be better to use in conjunction with another, more insulating sleeping pad during the winter. On the other hand, If you are willing to spend more money for a better insulated sleeping mat, you can get the Sea to Summit Ultralight insulated or Comfort Plus Insulated. The Ultralight Insulated has almost the same amount of comfort but is better insulated.
Close-up on the inflation valve

Review:
     I used this sleeping mat multiple times. Most
recently, I have used this sleeping pad on a winter
hiking trip. I used this sleeping mat in conjunction with a different basic closed-cell foam mat to add
insulation. The sleeping pad was quite comfortable and gave a great night sleep both nights it was slept in. This sleeping pad is durable and well made. I would recommend this product to anyone who camps in the spring, summer, and fall, but I would recommend a more insulated sleeping pad for winter and cold-weather camping. All in all, this is a great sleeping pad that is worth the cost because of it's smaller size and comfort.
The sleeping pad packed up in the included
bag
Close-up on the deflation valve

A view of the entire valve system. The inflation
and deflation valves are actually one valve with
2 different caps that can be closed both at once
(when in use), just the inner valve (inflate), and
Not at all (deflate)



The included repair pack
The Sea to Summit pump/sack being used to inflate the
sleeping mat
The completely deflated sleeping mat. The pump/sack is in
the upper-left corner. The pump sack is the same size as
the packed sleeping mat and can be used to store the
packed sleeping mat, hence the sack part of pump/sack.





Comments

  1. Good post. I need a light, preferably inflatable ground pad, and I will definitely look into this. Another good gear post.

    ReplyDelete
  2. Cool! I like how you separated your review from the intro.

    ReplyDelete
  3. I like how you included lots of pictures and like Shruti said, you separated your review from the intro which was very interesting.

    ReplyDelete

Post a Comment

Popular posts from this blog

The DIfference Between Top Rope Climbing, Lead Climbing and Bouldering

Top Rope Climbing Recently I had the opportunity to try both top rope climbing and bouldering at EVO in Portland. I also learned about lead climbing. Rock Climbing is the most basic of all of these three methods. This is when you climb up a fairly tall rock wall and you are tethered to the top of the wall and to a belayer. This is the safest of these methods when done correctly. Lead Climbing Lead Climbing is when you are climbing up a rock wall but are not tethered to the top of the wall. As you climb you clip your rope into different carabiners on the rock wall. You are also tethered to a belayer on the ground. When you are lead climbing if you fall, you will generally fall from 6 to 20 feet (Twice the distance from you to your last tie-off point). You generally want a belayer who is heavier than you so that when you fall they don't fly into the air. Bouldering Bouldering is when you climb up a wall that is about 16 feet tall without being strapped/h...

Origins of the Bycycle

In 1869,  Eugène Meyer of Paris invented the high-wheeler (aka. the "penny farthing") and the wire-spoke tension wheel. This was one of the earliest predecessors to the modern bicycle. With front wheels up to 60 inches in diameter and a direct drive system, they were hard to mount and painful to crash because of the height and hard to ride because of the high center of gravity. Despite all that, the penny farthing took off in popularity.  Next came the manufacturing of a rear-wheel, chain-drive  bicycle with similarly sized wheels and pneumatic tires. These inventions made the bike even more popular because the idea of riding a bicycle with symmetrical wheels wrapped in tires filled with air was a lot more fun than bouncing around high above the street on solid tires. An effect of the huge popularity of bicycles was that cities and municipalities began paving roads to accommodate the flood of cyclists. That's right. Roads were built for bikes. Remember th...

Petzl Adjama Harness Review

     I recently purchased this harness and used it at EVO Rock and Fitness. This harness is meant for mountaineering and ice climbing but it works fine when sport climbing as well. While I was using the harness, I climbed a few top-rope climbing routes with grades from 5.6 to 5.11 and boulder problems* from VO to V4. The harness was less constricting and allowed for a wider range of motion than all of the other harnesses I have used in the past. Even though people usually remove their harness before bouldering, I decided that because this harness did not restrict my range of movement that I would leave it on. There was no difference between bouldering with this harness on and bouldering with this harness off. There are also many other cool features on this harness. The gear loops for hanging climbing gear (Quickdraws, carabiners, slings, cams, bolts, extra rope, etc.) are filled with hard plastic in the front of the harness so that it is easy to reach your climbing gear. ...